X Series

X Series Communication Protocol

The communication protocol for XP and XD Series processors is listed below.

Written by Andrea
Updated over a week ago

How do I set up XPanel?

Control X Series DSP with our XPanel model programmable wall control.

Written by Andrea
Updated over a week ago

What are the different XConsole file types?

There are three different file types in XConsole including configuration settings, parameter settings, and presets.

Written by Andrea
Updated over a week ago

How do I save files in XConsole?

Save device settings using the Presets button in the XConsole device window. Save hardware and software settings and device presets.

Written by Andrea
Updated over a week ago

XConsole overview.

Connect, configure and control your X Series device by following the tutorial. The tutorial overviews the XConsole software.

Written by Andrea
Updated over a week ago

How should I set my limiter settings?

Limiters with very fast attack times may cause audio distortion. Please keep the following in mind when setting the limiter.

Written by Andrea
Updated over a week ago

What is the processing power limit for X Series?

X Series is comprised of XD and XP Series processors. Below is the processing power limit for X Series processors.

Written by Andrea
Updated over a week ago

There's a quick volume ramp-up/fade-in effect on my X Series. How can I turn this off?

If you are experiencing a quick ramp-up or fade-in effect, you will need to Bypass the ISO menu from the front panel of the X Series DSP.

Written by Andrea
Updated over a week ago

How do I factory reset my X Series processor?

A factory reset clears all data from the device. To perform a factory reset, please follow the steps below.

Written by Andrea
Updated over a week ago

My X Series device is not responding to the XTouchApp.

The XTouchApp enables users to control the X Series processor from any iOS, Android, PC and Mac device. Troubleshoot the connection below.

Written by Andrea
Updated over a week ago

Where do I find my X Series 8-digit code?

To password reset X Series devices, the 8-digit code is needed to successfully reset the password. This is found on the device front panel.

Written by Andrea
Updated over a week ago

How do I delete my X Series password?

Learn how to delete and clear a previously set password for S Series devices.

Written by Andrea
Updated over a week ago

What are the XP front panel menus?

Learn to navigate the front panel of the XP series. Input/output settings, network and device information can be accessed here.

Written by Andrea
Updated over a week ago

What are the XD front panel menus?

Learn to navigate the front panel of the XD series. Input/output settings, network and device information can be accessed here.

Written by Andrea
Updated over a week ago

How do I perform a Firmware Upgrade in XConsole?

Firmware upgrade your X Series device in XConsole by following a few simple steps.

Written by Andrea
Updated over a week ago

What's the difference between the XD and XP DSP units?

A few quick tips to spot the difference between these two bestselling processors.

Written by Amy
Updated over a week ago

Where's the Mac version of XConsole?

Find out how to use XConsole, Xilica's X Series programming software, if you're using a Mac.

Written by Amy
Updated over a week ago

How to reset your X Series password

If your XA-, XD- or XP- product is locked with a password, you can easily unlock password protection with a few steps.

Written by Amy
Updated over a week ago

Can I control my X Series DSP with another device?

Control for X Series DSP can be achieved using Xilica's XTouchApp, which can be used on any PC, Mac, Android or iOS device.

Written by Andrea
Updated over a week ago

What are the AES/EBU pin details for XD Series?

XD Series have AES/EBU digital audio via a standard DB-25 female connector (Yamaha standard). The AES/EBU pin details are as follows.

Written by Andrea
Updated over a week ago

How do I install the XConsole software?

XConsole is a PC-compatible software used to configure X Series processors. Easily install XConsole with a few simple steps.

Written by Andrea
Updated over a week ago

How do I link X Series input or output channels?

Link X Series input or output channels easily on the front panel of the device or in the XConsole software.

Written by Andrea
Updated over a week ago

My X Series device is not connecting!

If you are having trouble connecting your X Series device with XConsole, please follow the troubleshoot instructions.

Written by Andrea
Updated over a week ago