Solaro QR1, or XIO-8 

  1. Power down the unit. 
  2. Power up the unit. 
  3. Upon power up, the blue Operate LED will blink. 
  4. Wait for the Operate LED to stop blinking and remain a solid color.  
  5. Using a small, pointed object, push in and hold down the IP Reset button. 
  6. Wait until the Network light starts blinking and release the IP Reset button. 
  7. Once completed, the device will display In Xilica Designer's Network View as connected and online.

 Solaro FR1 or XIO-16 

  1. Power down the unit. 
  2. Power up the unit and wait for the blue LED (located at back of processor) to stop blinking. 
  3. Press and hold the IP Reset button on the back of the processor. 
  4. Hold the IP Reset button until the front panel displays "Resetting Network Configuration and Password"
  5. Once completed, the device will display In Xilica Designer's Network View as connected and online.

Neutrino, Uno, Rio

  1. Power down the unit.  
  2. At the back of the unit is an IP Reset button. 
  3. Using a small, pointed object, push in and hold down the IP Reset button. 
  4. Holding the IP Reset button, power up the unit.  
  5. Wait 10 seconds and release the IP Reset button.
  6. Allow the device to power on completely. This may take up to several minutes. 
  7. Once completed, the device will display In Xilica Designer's Network View as connected and online.
Did this answer your question?