To configure hardware IO card configuration, click here.
To configure software IO card configuration, click here.

Wiring Solaro cards

1. With your Solaro device configured in Xilica Designer, double click the DSP module to open it.

Software configured cards will display in the DSP schematic design.
Input cards are placed on the left. Output cards are placed on the right.
Different cards will be colored differently. Also notice the label, color and shape of input/output nodes on blocks. Matching nodes can be wired together. 

2. To wire input cards, locate the card module. Note the node label/shape/color. Click and drag the node to the appropriate block. Matching nodes can be wired together.
Ex. Audio Input cards are wired to the Audio input block.
GPIO Input cards are wired to the GPIO Input block.

DSP modules can be added between the audio input block and audio output block. The left Component Library menu lists available DSP modules. DSP Modules can be wired to matching input/output nodes.

To create space, drag a selection box around all output modules. Click and drag the modules to the right or use keyboard arrow keys. (Click here for design tips)

3. To wire output cards, locate the card module. Note the node label/shape/color. Click and drag the node to the appropriate block.
Ex. Audio Output cards are wired to the Audio Output block.
GPIO Output cards are wired to the GPIO Output block.

Double click the card module. You can configure the card settings for Analogue Audio Input Card and GPIO Output cards.

Did this answer your question?