Link inputs or outputs by using the front panel of the device or the XConsole software.
Any modification of the data will be applied to the entire group of linked channels.

To link input or output channels on the front panel of the device,
XD: The lower row of buttons on the unit selects the channel. Selected channels will light green. If the user presses one of the input or output Channel menu buttons, holds it down and presses any other channel menu button(s) in the input/output group, then the channels are linked together. To cancel linking, just press any other Channel menu key or the Exit key after releasing the held key.

XP: The row of buttons on the unit can activate channel mutes and select channels. Activated mutes will light the button red, selected channels will light the channel LED indicator green. To select the mute, simply press the button. To select a channel(s), hold down the menu cursor arrow and select the channel mute button.
If the user holds down the menu cursor arrow, and selects multiple channels, then the channels are linked together. To cancel linking, just press any other Channel menu key or the Exit key after releasing the held key.


To link inputs or outputs in the XConsole software,
At the top of the software, select "Setup" and "Link".
Choose to link inputs or outputs and select the desired parameters.
You can select your device and channel to link in the dropdown menus on the right.
Click "Ok" to confirm your changes.

Did this answer your question?