When inserting and removing modular cards, please follow these steps.
The Solaro Series of modular digital signal processors is completely card-based. No wasted I/Os, no wasted budget. Simply pick-and-mix your chosen card configuration, and get busy.
XC-SML: Two-Channel Analog Mic/Line Input Card
The XC-SML is a two-channel analog mic/line input card for analog signals, complete with 48V Phantom power, switchable per channel. It features high-quality mic pre-amps as standard, alongside selectable microphone gain and line. The XC-SML is equipped with 32-bit analog to digital converters.
XC-SLO: Two Channel Analog Audio Output Card
The XC-SLO is a two-channel audio output card for analog signals, complete with high-quality 32-bit digital to analog converters.
XC-SDA: Two Channel AES/EBU I/O Card
The XC-SDA is a two-channel digital audio I/O card which features selectable AES/EBU as input or output (per card).
XC-SUB: Two Channel USB I/O Card
The XC-SUB is a two-channel USB audio I/O card which features two inputs plus two outputs (per card).
XC-SGP: Four Channel GPIO Card
The XC-SGP is a four channel GPIO card, with channels selectable as input, voltage input or output (per card).
XC-S2R: Two Channel Relay Output Card
The XC-S2R is a two-channel relay output card.
XC-EMPT: Blanking Panels for Empty Card Slots
XC-EMPT are plastic blank panels for empty, unused Solaro Series card slots. Each Solaro Series product includes a blank panel for each card slot as standard.
XC-CTODN: Solaro FR1 Optional User-Installed Dante™ Module
For Solaro FR1 products only, Xilica offers a XC-CTODN module, giving integrators 64x64 send/receive Dante capabilities at 48kHz sampling, or 32x32 at 96kHz sampling. Solaro QR1 ships with a 4x4 Dante module as standard, factory-installed. XIO-8 features a 4x4 Dante module by default, whilst XIO-16 offers 32x32 as standard.
Modular Card Specifications
XC-SML: Two-Channel Analog Mic/Line Input Card
Number of Channels 2
Maximum level +20dBu
Input impedance ~2k Ohms
Mic gain Mic (+42dB gain in 6dB steps)/Line (0dB) Premium quality mic pre-amps
Type Electronically balanced w/ 48V Phantom power
Frequency response +/-0.15dB (20 to 20kHz)
Dynamic range 110dB typ (unweighted)
CMRR >50dB @ 1kHz
Crosstalk <-110dB @ 1kHz
Distortion 0.002% (1kHz @ +4dBu)
A/D conversion 32 bits resolution
Connectors 6 position Phoenix plug-in 3.81mm type
XC-SLO: Two-Channel Analog Output Card
Number of Channels 2
Maximum level +20dBu
Output impedance ~50 Ohms
Type Electronically balanced
Frequency response +/-0.15dB (20 to 20kHz)
Dynamic range 110dB typ (unweighted)
CMRR >50dB @ 1kHz
Crosstalk <-110dB @ 1kHz
Distortion 0.002% (1kHz @ +4dBu)
A/D conversion 32 bits resolution
Connectors 6 position Phoenix plug-in 3.81mm type
XC-SDA: Two-Channel AES/EBU Digital Audio Card (Input mode)
Number of Inputs 2
Sampling rate Any sampling rate up to 192kHz (Autodetect)
Connectors 6 position Phoenix plug-in 3.81mm type
XC-SDA: Two-Channel AES/EBU Digital Audio Card (Output mode)
Number of Outputs 2
Sampling rate 48/96kHz fixed (depends on device settings)
Connectors 6 position Phoenix plug-in 3.81mm type
XC-SUB: Two-Channel USB Audio Card
Number of Inputs 2
Number of Outputs 2
Driver sampling rate 48kHz
Internal sampling rate 48/96kHz (depends on device settings)
Connectors USB type B female
XC-SGP: Four-Channel GPIO Card (Input Mode)
Number of inputs 4
Input type GPIO Logic or Voltage (software selectable per card)
Logic GPIO Short to ground to activate
Voltage GPIO Can sense 0-24V DC, can provide 12V DC
Connectors 6 position Phoenix plug-in 3.81mm type
XC-SGP: Four-Channel GPIO Card (Output Mode)
Number of outputs 4
Output type GPIO LED or Sink (software selectable per channel)
LED 3mA per output
Source Sink 300mA per output
Connectors 6 position Phoenix plug-in 3.81mm type