Please follow the instructions below to manually assign a unique static IP address to your computer. 

Windows Platform

In the Start menu and select "Control Panel".

Click "Network" then "Internet".

Under the heading Network and Sharing Center, select "View Network Status and Tasks".

Click "Change adapter settings" in the left bar.

Select "Local Area Connection", then click on the "Properties" button. Select "Internet Protocol Version 4 (TCP/IPv4)" then "Properties".

Use the following settings for your PC's unique static address:
IP Address: 192.168.1.X - where X can be any value from 0-254 but unique from other manually assigned device IP addresses.

The Subnet is: 255.255.255.0

The Gateway is the same first 3 groups of digits as the computer IP address with the last number being 1. (Ex. Computer IP Address: 192.168.1.254 , Device Gateway is: 192.168.1.1)

To set up a static IP address for devices, click here.


Mac Platform

From the Apple menu, select "System Preferences". 

Select "Network".

From the sidebar, select the Network interface that you are using.
Then click "Advanced..."

In the TCP/IP tab, set Configure IPv4 to "Manually" using the drop down menu. 

Enter a static IP address in the IPv4 Address field.

Use the following settings for your computer's unique static address:
IP Address: 192.168.1.X - where X can be any value from 0-254 but unique from other manually assigned device IP addresses.

The Subnet is: 255.255.255.0

The Gateway is the same first 3 groups of digits as your computer Address with the last number being 1. (Ex. Computer IP Address: 192.168.1.254 , Device Gateway is: 192.168.1.1)

Click "OK" and "Apply" to save your changes.

To set up a static IP address for devices, click here.

Did this answer your question?